For a music video uploaded to YouTube, aim for about 8 Mbps of video bitrate at 1080p (24 to 30 fps) and 35 to 45 Mbps at 4K, with stereo audio at 384 kbps. Those are YouTube’s own recommended upload figures. Going higher mostly makes the file bigger without making it look better. If you build lyric videos in Typebeat, you choose the resolution (1080p or 4K) and the output format, and the numbers below tell you what a sensible export looks like.
TL;DR
- Video bitrate is how much data each second of picture gets. Audio bitrate is separate, and both add up to the file size.
- YouTube recommends 8 Mbps for 1080p at 24 to 30 fps and 12 Mbps at 48 to 60 fps. For 4K it recommends 35 to 45 Mbps and 53 to 68 Mbps.
- Higher is not always better. Past a codec’s threshold, extra bits add size and no visible quality.
- Keep the frame rate you shot or rendered at. Do not convert it just to hit a number.
- File size is bitrate times duration divided by 8. A 3:30 song at 1080p lands around 220 MB.
Table of Contents
- What bitrate means for a music video
- Why a higher bitrate is not always better
- Bitrate settings by resolution and frame rate
- Audio bitrate for a music video
- Music video frame rate and how it affects bitrate
- Lyric video bitrate settings
- Lyric video file size
- Common bitrate mistakes
- Where Typebeat fits
- Our view on bitrate
- FAQ
- Sources
What bitrate means for a music video
Bitrate is the amount of data used per second of video, measured in kilobits per second (kbps) or megabits per second (Mbps). One Mbps is 1,000 kbps. More bits per second means the encoder can keep more detail, which is why a higher bitrate generally looks cleaner.
A music video file carries two streams, and each has its own bitrate:
- Video bitrate: the picture. This is the big number, usually thousands of kbps.
- Audio bitrate: the song. Much smaller, usually 128 to 512 kbps.
When people search for music video bitrate they often mean the video side, but the audio matters more for a musician than for almost anyone else. YouTube’s recommended upload audio bitrates are 128 kbps for mono, 384 kbps for stereo and 512 kbps for 5.1 surround. For a normal stereo release, 384 kbps is the figure to use.
Why a higher bitrate is not always better
Video is compressed with a lossy codec, which means the decoded picture never matches the source exactly. MDN’s codec guide explains that quality generally improves as the bit rate goes up. That is the part everyone remembers.
The part people forget is the ceiling. Frame.io’s explainer on export myths notes that each codec has a performance threshold, and pushing the bitrate beyond it gives no further perceptible improvement. Past that point you are paying in file size, upload time and storage for nothing you can see.
There is also a practical reason not to overshoot. Platforms re-encode what you upload. Handing YouTube a 200 Mbps file does not make the final stream 200 Mbps. It makes your upload slower and your drive fuller.
So the goal is not the highest number. It is the number that sits at or just above the platform’s recommendation for your resolution and frame rate.
Bitrate settings by resolution and frame rate
YouTube publishes the most widely used targets. For standard dynamic range (SDR) uploads, the recommended video bitrates are 8 Mbps at 1080p for 24, 25 and 30 fps, and 12 Mbps for 48, 50 and 60 fps. The same page lists 35 to 45 Mbps for 4K at standard frame rates and 53 to 68 Mbps at high frame rates.
| Resolution | Frame rate | Recommended video bitrate (YouTube, SDR) |
|---|---|---|
| 1080p | 24, 25, 30 fps | 8 Mbps |
| 1080p | 48, 50, 60 fps | 12 Mbps |
| 4K (2160p) | 24, 25, 30 fps | 35 to 45 Mbps |
| 4K (2160p) | 48, 50, 60 fps | 53 to 68 Mbps |
Notice that 4K does not ask for four times the bitrate of 1080p, even though it has four times the pixels. Frame.io explains that UHD needs more bits than HD to hold its quality, but not a straight fourfold increase, because neighboring pixels in a high-resolution image tend to look alike and compress well.
Which number to pick inside a range
The 4K range is wide, so a rule of thumb helps. Use the lower end when the picture is calm: a static background with animated text, slow cross-fades, simple color fields. Use the upper end when the picture is busy: fast cuts, handheld concert footage, grain, confetti, lots of particle effects. Busy frames change more from one moment to the next, so they need more data to stay clean.
Audio bitrate for a music video
The audio is why people listen, so do not let it be the afterthought. Stick with these:
- Stereo release: 384 kbps, per YouTube’s recommendation above.
- Mono recording (a voice memo demo, a spoken intro): 128 kbps.
- Surround mix: 512 kbps. Most independent releases never need it.
Match the source as well. If your master is a 48 kHz WAV, keep that sample rate through the export. Converting between 44.1 and 48 kHz is rarely worth the trouble. Upload from a lossless WAV rather than an MP3 whenever you have one, since compressing an already compressed file stacks losses.
Music video frame rate and how it affects bitrate
Frame rate is how many pictures are shown per second. It changes the bitrate you need, because 60 frames per second carries twice as many pictures as 30. That is exactly why YouTube’s 1080p target steps up from 8 to 12 Mbps at 48 to 60 fps.
The rule is simple. YouTube recommends encoding and uploading at the same frame rate you recorded at. If your footage is 24 fps, export 24 fps. If it is 30, export 30. Converting 24 to 60 does not add motion detail. It only raises the bitrate you need.
A quick guide to choosing when you are starting fresh:
- 24 fps: the classic cinematic look. A good default for narrative or moody music videos.
- 30 fps: a slightly smoother, more everyday feel. Common for performance clips and social content.
- 60 fps: very smooth motion. Worth it for fast dance or sports-style footage, and it costs you more bitrate.
For lyric videos, where the main motion is text moving on screen, 24 or 30 fps is usually plenty.
Lyric video bitrate settings
A lyric video is mostly a song with moving words over a background, so the bitrate logic is the same as for any other video. Work through it in this order:
- Decide the platform. YouTube full-length, a vertical clip for TikTok or Shorts, or a square cut for a feed.
- Pick the resolution. 1080p is the safe default. Use 4K when the video is the main release or when you want the sharpest text on large screens.
- Match the frame rate to your footage, as above.
- Set the video bitrate from the table: 8 Mbps for 1080p at 30 fps, 35 to 45 Mbps for 4K at 30 fps.
- Set the audio to stereo at 384 kbps and keep the sample rate of your master.
Codec and keyframes
YouTube asks for H.264, and the codec shapes how far your bitrate goes. Frame.io notes that H.264 uses long-GOP compression to pack more information into a given bitrate than lightly compressed formats such as ProRes. A GOP is a group of pictures: one full frame followed by frames that only store the changes. That is why a small H.264 file can look good, and why ProRes files are huge.
For H.264 uploads, YouTube prefers a closed GOP with a length of half the frame rate. At 30 fps that means a keyframe every 15 frames. If you export from a tool that handles this for you, you can leave the setting alone. If you are exporting from an editor, this is the field to check.

Vertical and square exports
Short-form platforms use vertical video, and the pixel count is similar to widescreen. Treat a 1080 by 1920 vertical export like 1080p for bitrate purposes. If you are making Shorts specifically, the vertical, word-synced Shorts guide walks through the format.
Lyric video file size

File size is easy to estimate once you know the bitrates. The formula is:
size in megabytes = (video kbps + audio kbps) × seconds ÷ 8 ÷ 1,000
The division by 8 turns bits into bytes. Here is a worked example for a 3 minute 30 second song (210 seconds) with 384 kbps stereo audio:
| Export | Video bitrate | Approx. file size |
|---|---|---|
| 1080p, 30 fps | 8 Mbps | 220 MB |
| 1080p, 60 fps | 12 Mbps | 325 MB |
| 4K, 30 fps | 35 Mbps | 929 MB |
| 4K, 30 fps | 45 Mbps | 1.19 GB |
| 4K, 60 fps | 68 Mbps | 1.8 GB |
These are estimates, since real files include a little container overhead and variable bitrate encoders fluctuate around the target. They are close enough to plan storage and upload time. A four-minute song scales up by about a fifth.
The same math tells you why a 4K lyric video takes noticeably longer to upload. If your connection is slow, a 1080p export is the quicker path to getting the release live, and on a phone screen the difference is small.
Common bitrate mistakes
- Upscaling the bitrate on a low-quality source. More bits cannot restore detail that was never there.
- Raising the frame rate for smoothness. It does not create new motion. It only raises the data you need.
- Exporting audio as a low-bitrate MP3 first. Start from the WAV master and let the final export do one compression only.
- Using the same number for every platform. A square feed post and a full 4K YouTube release do not need the same settings.
- Chasing huge numbers. Beyond the codec’s threshold you are only adding file size.
Where Typebeat fits
The bitrate work is the technical end of a job that starts with timing the words. In Typebeat you upload your audio and footage in the browser, and the lyrics are aligned automatically to the vocal, word by word. It also handles beat detection and background cuts, so you are not keyframing text by hand. You then export in 1080p or 4K, in vertical, square or widescreen, and you can publish directly to platforms like TikTok.
The free plan gives you a limited number of renders each month with a watermark. Pro is $10 per month and Studio is $50 per month, and paid plans raise the output limits and remove the watermark. You can see the details on the pricing page, or try the lyric video maker directly.

If you are planning a full-length YouTube release at the top resolution, the guide to a full-song 4K YouTube lyric video covers the whole workflow. To get the timing right in the first place, see how to add lyrics to a video, timed word by word.
Our view on bitrate
Most artists we talk to over-think bitrate and under-think timing. A lyric video lives or dies on whether each word lands on the beat, and a viewer forgives a modest bitrate far sooner than a late word.
Our approach is to take the repetitive work off your hands. Typebeat auto-aligns the lyrics to the vocal, detects the beat for cuts and effects, and gives you ready-made style templates you can customize, so your time goes into how the video looks and sounds rather than into frame-by-frame editing.
Then you export once at the resolution the release deserves: 1080p for everyday posts, 4K for the main YouTube release, in the format each platform expects. Pick the target from the table above, keep your frame rate, and publish.
the author
FAQ
What is a good bitrate for a 1080p music video?
YouTube recommends 8 Mbps for 1080p at 24, 25 or 30 fps, and 12 Mbps at 48 to 60 fps. Pair it with stereo audio at 384 kbps. That combination gives a clean result for most songs.
What is the bitrate of 4K video?
For 4K uploads to YouTube, the recommended range is 35 to 45 Mbps at standard frame rates and 53 to 68 Mbps at high frame rates. Use the lower end for simple, text-driven visuals and the higher end for fast, detailed footage.
Does a higher bitrate always mean better quality?
No. Quality improves with bitrate up to a point for each codec, and beyond it you get a larger file with no visible gain. Stay near the platform’s recommendation for your resolution and frame rate.
How big will my lyric video file be?
Multiply the total bitrate in kbps by the duration in seconds, then divide by 8 to get kilobytes. A 3:30 song at 1080p, 8 Mbps video and 384 kbps audio comes to roughly 220 MB. The same song in 4K at 35 Mbps is about 929 MB.
Which frame rate should I use for a music video?
Use the frame rate you shot or rendered at. 24 fps suits a cinematic look and 30 fps a smoother everyday one. Reserve 60 fps for fast motion, because it needs a higher bitrate.
Sources
- YouTube recommended upload encoding settings, YouTube Help
- Web video codec guide, MDN
- Video Bitrates and Export Myths, Frame.io Insider
- H264? ProRes? DNxHD? How to Choose the Right Codec, Frame.io Insider
